Uses: Water-based, high grade elastic bituminous waterproofing emulsion, elasticity >180%. Used for waterproofing flat roofs, balconies, baths, basement walls, and especially for elevation walls under cladding. Should be protected from sun light after it dries.
Application: Treat concrete surface by vimaplan putty, also cut, prime and seal cracks by bitumen Sealer No1 and tie rods by grout Vimacrete power TH or Waterfix. Clean, dry, then apply first coat of coat 6S diluted up to 50% water by using brush or roller, after it dries (tack free > 4h) apply second coat, then third coat.
Package: 18kg black.
Mixing Ratio: First layer (priming) diluted with water up to 50%, subsequent layers 0-30% water.
Yield: 0.2 - 0.4 kg/m2 per coat, 0.6-1.2 kg/m2 per three coats