• Flexiblock
 (0 reviews)
  • Product Code: Flexiblock
  • Availability: In Stock
  • Technical Data Sheet: click to download pdf

Uses:  Two component flexible cementitious for waterproofing tanks, roofs, terraces, walls, internal side of basement walls. It can be used as a final coat or covered by tiles or plaster.

Application: Clean, treat surface by Vimaplan putty and wet. Add the 25kg powder to  the 8 kg resin and mix then leave for 10 min and stir again. Apply first coat using a brush, roller or spatula, above it when still wet, apply mesh 2.5mm (optional) then coat. After the first coat has dried within 2 hours apply a second coat for the case of ground moisture, a third coat for water without pressure, a fourth coat for water with pressure.

Package: 33 (25+8) kg

Mixing Ratio: Powder 25 kg + Resin 8 kg

Yield:  2, 3, 4 coats = 1.5, 2, 2.5 mm = 2.5, 3.5, 4.5 kg = 13, 9.5, 7.5 m2/unit

Write a review

Note: HTML is not translated!
    Bad           Good