MawadFix MF-P500

  • MawadFix MF-P500
 (0 reviews)
  • Product Code: MawadFix MF-P500
  • Availability: In Stock
  • Technical Data Sheet: click to download pdf

Description: Two component high strength pure epoxy, slow setting chemical anchoring resin system.
Approvals and Features: CE certified, ETA approved for seismic Loads C2, cracked concrete, flooded holes, wet and dry concrete. F240 Fire Test report. ICC-ES (USA) approval, WRAS approved for use with potable water. Used for threaded rods and rebars, overhead applications, large and deep holes (zero shrinkage), diamond drilled holes, long working time. Anchor life 50 years, manufactured in the United Kingdom.

Application:
- Drill hole diameter (Dbar+4mm), hole depth (15-20 Dbar as a guide) according to design and considering load, strength, spacing, edge distance, wet, cracked concrete, etc).
- Clean using compressed air: blow 2x, brush 2x, blow 2x. (use 4x for manual compressor).
-  Discard the first 10ml (5cm) of resin, inject starting from the back of the hole and fill (1/2 - 2/3).
- Install and rotate rebar during the open gel time (25min @ 25C*)
- Load anchor after 24 hours (min curing time 8-16 hours@ 25C*)

Package: Cartridge 385, 585 ml, red

Yield: N = 21, 15, 12, 9, 6 for rebars 10, 12, 14, 16, 20mm
(based on cartridge 385ml, hole diameter Dbar+4mm, depth 20 Dbar, waste 20%)

Write a review

Note: HTML is not translated!
    Bad           Good