COAT #2

Uses: Water-based, bituminous emulsion with fillers. Used for waterproofing sloped roofs, balconies, baths, basement and elevation walls, and especially for protecting underground concrete and primining for membranes.

Application: Treat concrete surface by Vimaplan putty, also cut, prime and seal cracks by bitumen Sealer No1. Clean, dry, then apply first coat of coat #2 diluted up to 50% water by using brush or roller, after it dries (tack free > 4h) apply second coat, or third coat.

Package: 18kg black.

Mixing Ratio:  First layer (priming) diluted with water up to 50%, subsequent layers 0-30% water.

Yield: 0.4 - 0.6 kg/m²  per coat, 1.2-1.8 kg/m2 per three coats